Dash board, JE

Dismantling the dash board, replacement of back light and indicators, Espace JE

Getting the display out

Get access to the display in the following way:

Remove the plastic covers over the loud speakers.
Remove the three torx screws in the speaker plates.
Lift out the speaker plate and disconnect the wire
Pull the large cover over the dash board forward and up.
The display is mounted with three torx screws against the front and two aginst the bottom. The two latter ones are located underneath the two large rubber cubes, which needs to be removed.

The three screws in each side are removed, and the plate with the speaker can be removed and the speaker disconnected. When both speakers are removed, the entire dash board top plate can be pulled forward in the direction of the arrow and removed.

Instrument lamps

Lampe	Type	Suppliers	Price
Control lamp in mega display, e.g. control lamp for headlights, hand break etc.	Wedge base12V, 50mA, 5 mm, L=18 mm	RS Components Farnell	< 1 EUR @ 10 pcs
Display back light	Wedge base12V, 2.2W, 10 mm, L=27 mm	RS Components Farnell	< 1 EUR @ 10 pcs
Red error-light for clock-display	Wedge base 12V, 3W, 10 mm, L=27 mm	RS Components Farnell	< 1 EUR @ 10 pcs